DIFFERENTIAL RING & PINION FOR DANA 30 FRONT & DANA 44 REAR - RING & PINIONS INCLUDING TIMKEN BEARING KITS; FOR JK; 5.13 RATIO; REQUIRES 3.73 & HIGHER CARRIER; IF CURRENTLY USING A 3.21 RATIO YOU WILL NEED TO PURCHASE A NEW FRONT CARRIER
Excel's broad line of original equipment automotive and light truck/SUV replacement ring & pinion gears, axles, and installation kits offer Richmond's high OEM quality at affordable prices. The Excel product line covers the most popular vehicles on the road today.
Information:
DIFFERENTIAL RING & PINION FOR DANA 30 FRONT & DANA 44 REAR - RING & PINIONS INCLUDING TIMKEN BEARING KITS; FOR JK; 5.13 RATIO; REQUIRES 3.73 & HIGHER CARRIER; IF CURRENTLY USING A 3.21 RATIO YOU WILL NEED TO PURCHASE A NEW FRONT CARRIER
Application Summary:
| Year |
Make/Model |
| 2007-2018 |
Jeep Wrangler |
| Attributes |
| App/Model |
Dana 30 JK Reverse, Dana 44 JK |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Cover Bolt Quantity |
10, 10 |
| Differential Carrier Break |
3.73 Ratio and Higher |
| Differential Case Design Type |
Dana 30, Dana 44, Dana 44, Dana 44 Rear (D44513JK), Dana 30 JK Reverse, Dana 44 JK |
| Emission Code |
Legal US |
| Front Differential Carrier Break |
Open case 3.73 and up |
| Gear Ratio |
5.13 |
| Harmonized Tariff Code (Schedule B) |
8708504110 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Pinion Gear Tooth Quantity |
8, 8 |
| Pinion Shaft Diameter |
1.376, 1.376 |
| Pinion Spline Count |
24, 24 |
| Position |
Front and Rear |
| Ratio |
5.13 |
| Ring and Pinion Gear Ratio |
5.13 |
| Ring Gear Bolt Quantity |
10, 10 |
| Ring Gear Diameter |
7.12 Front (D30513FJK), 8.5 Rear (D44513JK) |
| Ring Gear Material |
8620 Steel, 8620 Steel |
| Ring Gear Outside Diameter |
7.12 Front (D30513FJK), 8.5 Rear (D44513JK) |
| Ring Gear Rotation |
Reverse Front (D30513FJK), Standard Rear (D44513JK), Reverse Front (D30513FJK), Standard Rear (D44513JK) |
| Ring Gear Tooth Quantity |
41, 41 |
| SDR Required Flag |
N |
| Taxonomy |
Differential LD |
| Taxonomy A |
LD Differential |
| Taxonomy B |
Ring and Pinion Gear Packages |
| Taxonomy C |
Front and Rear |
| Taxonomy D |
5.13 |
| GTIN |
00698231531174 |
